PP Vertical Glandless Pump

• No maintenance required
  
• Can withstand corrosion
• Easy operation

• No maintenance since the pump can even run dry indefinitely as there are no packing,bushes or internal bearings
• All the wet - end parts are in soild monlded construction to with stand corrosion and erosion.
• Reduction of downtime production losses in view of above features.
• The impeller are semi-open type used in our all vertical pumps to suit both clear and polluted fluids.
• Pump mounted outside the suction tank and is not submerged type..

• Phosphoric Acid Plants.
• Gas Washing Plants.
• Rayon Plants.
• Caustic Soda Plants.

SS MODEL MBSS-1 DESCRIPTION

• OUTER DIA :- 40 mm,
• Outlet size :- 20 mm Internal Threaded Coupling
• Power :- 0.88 kw,
• Speed :- 10000 RPM,
• Voltage :- 220v , 50 Hz,
• Fitted with ON-OFF Switch,
• Available with Flame proof Motor Also (NON CMRI)
• MATERIAL OF CONSTRUCTION:- S.S PIPE TUBE , SS IMPELLER SS SHAFT
• MEASUREMENT:- 145 X 33 X 22 cm IN Bulit Filters
  

• OUTER DIA :- 40 mm,
• Outlet size :- 20 mm Internal Threaded Coupling
• Power :- 0.88 kw,
• Speed :- 10000 RPM,
• Voltage :- 220v , 50 Hz,
• Fitted with ON-OFF Switch,
• Available with Flame proof Motor Also (NON CMRI)
• MATERIAL OF CONSTRUCTION:- PP PIPE TUBE , PP IMPELLER AND ALLOY 20 SHAFT
• MEASUREMENT:- 145 X 33 X 22 cm IN Bulit Filters

• OUTER DIA :- 40 mm,
• Outlet size :- 20 mm hose Nipple end
• Power :- 0.88 kw,
• Speed :- 10000 RPM,
• Voltage :- 220v , 50 Hz,
• Fitted with ON-OFF Switch,
• Available with Flame proof Motor Also (NON CMRI)
• MATERIAL OF CONSTRUCTION:- ALUMINIUM PIPE TUBE , PLASTIC IMPELLER MS SHAFT
• MEASUREMENT:- 145 X 33 X 22 cm IN Bulit Filters

• The recognizable leading improvement is the deletion of problems get to your feet from the use of powered seal, insulation box and inside bearing.
• The aptitude of pump to run dry eliminates single reason of interruption which is regularly attributable to the human component this feature is very convenient in process needing continuous transference of a corrosive fluid with a high gradation of reliability e.g. Disposal of acid effluent.
• The glandless pumps lend itself to process incorporating automatic control of a pump discharge valve. The "controlled leakage" acts as an integral by-pass. The pump suffers no ill effects if the discharge valve is partially or fully closed.
• The maximum main improvements to be derivative from the use of glandless pump are in the province of maintenance and following reduction in down time invention victims. Normal maintenance on the glandless pump is confined to lubrication of the driving.

• No mechanical seal, stuffing box and internal bearings provided.
• No maintenance since the pump can even run dry indefinitely as there is no packing, bushes or internal Bearings.
• Reduction of downtime production losses in view of above features.
• All the wet-end parts are in solid molded construction to with stand corrosion and erosion.
• The impeller is semi-open type used in our all-vertical pumps to suit both clear and polluted fluids.
• Pump mounted outside the suction tank and is not submerged type.
• Polypropylene are manufactured by solid injection molding process with high pressure hence.

• PP 50 TO 80 C
• PPH 90 TO 100 C
• PVDF 100 TO 115C