Self priming Multistage Gear pump

About Self priming Multistage Gear pump

Self priming Multistage Gear pump Applications: - Irrigation - Sprinkler installations -Water works \ Fire fighting - MiningFuel pumping Handling volatile liquid - Wash down applicationsHydraulic press/circuits Transfer and circulation hot and cold WaterBoiler feed pumps - Condensate pumps Features: Vertically split suction. intermediate and discharge casings clamped together by external tie bolt and sealed with gaskets or O ring as required by the design, pumping temperature of the liquid pumped and the construction of the pumpGrease lubricated Antifriction Bearings designed to meet the requirements mounted on either sidePump uses soft graphite lubricated asbestos. The shaft is fitted with renewable shaft sleeve in the region of the stuffing box, which protects the shaft from wear due to packing. Special water-jacketed stuffing boxes, and special design of stuffing boxes with mechanical seals are availableThe discharge nozzle is top vertical. Suction nozzle horizontal located on the right hand side, left hand side or central position when viewed from the driving end Is available. The flanges are round corresponding to international standardsThe direction of rotation is clockwise as viewed from the driving end